WBL - SHARK 190

Laser welded wall saw blade
Ø 825 mm / Ø 1025 mm and Ø 1225 mm

Professional diamond saw blade
Starting with limestone through to flint, WBL - SHARK 190 is applicable for all aggregates

New matrix-configuration effects increase of utilizable diamonds through minimale
"pull-out" rate.





Extremely easy cutting, especially in reinforcing.
Higher cutting dephts through new saw blade diameters.
Minimale reduced feed while cutting-off reinforcing through increased ship space.
Higher lifetime through improved bonding of diamonds.
Highest safety through laser welding up to Ø 1225 mm and 100% segment inspection.
New core design, wide, inclined arrow-shaped slots point to correct rotational direction and effect best mud removal.

WGT-XC

wet cutting up to 15kW

URTEL XC-Technologie for highest requirements.
Excellent cutting performance even used on heavily reinforced concrete.



Die URTEL TURBO - diamond segments are notched alternately for optimum water supply and high cutting speeds.

- 13,4 mm segment height reduces tool costs.
- TRIPLEX - segments allow an outstanding utilization of diamons saw blades.

Application:
Vs= 40 - 45 m/s soft aggregates, reinforced
Vs= 35 - 40 m/s hard aggregates, heavily reinforced

WGT-XE

Wet cutting > 11kW

URTEL XE-Technologie for highest requirements.
Excellent cutting performance even used on heavily reinforced concrete.



Die URTEL TURBO - diamond segments are notched alternately for optimum water supply and high cutting speeds.

- 13,4 mm segment height reduces tool costs.
- TRIPLEX - segments allow an outstanding utilization of diamons saw blades.

Application:
Vs= 40 - 45 m/s soft aggregates, reinforced
Vs= 35 - 40 m/s hard aggregates, heavily reinforced

WGT-BT

Wet cutting > 15kW

URTEL BT-Technologie for highest requirements.
Excellent cutting performance even used on heavily reinforced concrete.



Die URTEL TURBO - diamond segments are notched alternately for optimum water supply and high cutting speeds.

- 13,4 mm segment height reduces tool costs.
- TRIPLEX - segments allow an outstanding utilization of diamons saw blades.

Application:
Vs= 40 - 45m/s soft aggregates, reinforced
Vs= 35 - 40 m/s hard aggregates, heavily reinforced

special spacing C2KS - Triplex-design type

Wet cutting 7,5 - 15kW

WB 100 < 9 kW extremely easy cutting
WB 120 < 11 kW easy cutting
WB 150 > 11 kW extremely easy cutting
WB 160 > 11 kW easy cutting
WB 170 > 15 kW easy cutting

special spacing C2SP - Triplex-design type

Wet cutting 7,5 - 20kW

WB 400 < 15 kW extremely easy cutting
WB 420 < 15 kW easy cutting
WB 450 > 15 kW extremely easy cutting
WB 450 > 15 kW easy cutting
WB 480 > 20 kW easy cutting

Wet cutting 11 - 20kW

WB 233-V < 15 kW extremely easy cutting
WB 234-V < 15 kW easy cutting
WB 250-V > 15 kW extremely easy cutting
WB 256-V > 15 kW easy cutting

Wet cutting 18 - 30kW

WB 240-V < 18 kW extremely easy cutting
WB 243-V < 18 kW easy cutting
WB 260-V > 18 kW extremely easy cutting
WB 263-V > 18 kW easy cutting